CAM80
8 INPUT x 1 OUTPUT 80 W MIXER-AMPLIFIER
DESCRIPTION
The EAW Commercial CAM80 is an integrated audio mixer and power
amplifier outfitted with comprehensive input/output facilities and
feature sets to provide exceptional versatility from a highly cost-
effective package. Designed for a wide range of fixed installation
applications, the CAM80 offers “all in one” functionality without
need for add-ons such as expansion modules.
The CAM80 is equipped with six actively balanced combination
mic/line inputs as well as individual adjustable potentiometers for
line level input, mic level input and mic level input with 24-volt DC
phantom power. Input 1 also offers the flexibility of an integrated
transformer for connection to telephone paging systems.
Features
Inputs 1 and 2 are divided into four discrete input sections: a
combination XLR/TRS connector, Phoenix connector, or terminal
strip. Meanwhile, Inputs 3, 4, 5 and 6 offer both Phoenix connectors
and terminal strips. Two pairs of RCA connectors allow unbalanced
auxiliary (Aux) signals to enter the amplifier via Aux 1 and Aux 2,
both of which are attenuated by a potentiometer on the front of the
amplifier.
• Two combination 1/4-inch/XLR/Phoenix, or barrier strip
Mic/Line inputs
• Four Phoenix connector or barrier strip Mic/Line inputs
• Selectable 24-volt phantom power
• Two stereo auxiliary inputs
• Multiple priority levels
Two levels of priority can be established on Inputs 1 and 2, initiated
with external contact closures or adjustable signal threshold levels.
External volume control is possible through a Phoenix connector
and user supplied potentiometer. A two-position Phoenix connector
allows the internal fault relay to be connected to redundant systems.
And, an adjustable pre-announcement chime is also included.
• Transformer-balanced telephone paging on Input 1
• Signal processing loop
• Internal fault-activated relay
• External volume control
Front panel controls include a level control for each input, a toggle
switch for Aux 1 or Aux 2 selection, and one Aux master level control
for the selected Aux. Low and high EQ controls offers 12 dB of boost
or cut at 100 Hz and 10 kHz, respectively. A master volume control
affords output volume control, while distinctive LEDs indicate power
(green), signal (amber), overload (red), and fault (red).
• 4-Ohm, 25-volt, 70-volt and 100-volt outputs
• Automatic changeover to 24-volt DC backup power
• Universal power supply
• UL Approved
The CAM80 provides 80 watts of output power at 100 volts, 70.7
volts, 25 volts and 4 Ohms. An intelligent output stage is fully
protected against permanent damage caused by overloading, shorts
and thermal faults.
Applications
The CAM80 will operate on 100 volts to 240 volts AC power (50/60
Hz), and is supplied by a detachable IEC power cord. A combination
banana plug/binding post connection is also provided for
connecting an external 24-volt DCbackup battery.
• Paging Systems
• Hotel and Ballrooms
• Schools
• Houses of Worship
• Meeting Rooms
• Offices
• Foreground/Background Music Systems
Eastern Acoustic Works
|
One Main Street
TEL outside US 508.234.6158
|
Whitinsville, MA 01588 USA
|
TEL toll free within US/Canada 800.992.5013
|
FAX 508.234.8251 | Page 1 of 2
Part No. 0022199 Rev. A 11/08
|
Easyrig Camcorder Accessories Camcorder Tripod User Manual
Everpure Water Dispenser OW200L User Manual
Finisar Network Card FTLX8561E2 User Manual
Frigidaire Microwave Oven 316902449 User Manual
FUNAI CRT Television CR270TT8 User Manual
Gemini CD Player CD 2000X User Manual
Gianni Industries Door L 1200 User Manual
Gianni Industries Power Supply PSM 01T 4 User Manual
Gigabyte Computer Hardware GA EP45 UD3P User Manual
Gitzo Camcorder Accessories GT3530 User Manual